FREQUENTLY ASKED QUESTIONS

Service 24/7 Always Open

Same Day Service

No Extra Charge Nights, Weekends Or Holidays

FREQUENTLY ASKED QUESTIONS ABOUT HEATING AND COOLING SYSTEM

Suburban Heating and Air Conditioning is the heating and air conditioning authority in West Michigan, including Kalamazoo, Portage, Plainwell, Otsego Allegan, Mattawan, Paw Paw, Schoolcraft, Three Rivers, Richland and Gull Lake. Get answers to some of the most commonly asked questions about heating and cooling equipment, energy efficiency, air quality and maintenance below.
Technician Repairing Air Conditioner — Kalamazoo, MI — Suburban Heating & Air Conditioning

Q. what do you charge for after-hour and weekend service?

  • Read more

    There is NO EXTRA charge for Nights, Weekends, or Holidays!

Q. what are your covid-19 safety measures?

  • Read more

    The safety, health, and well being of our customers are of the utmost importance to us. Our technicians are exercising precautionary measures such as wearing face masks, booties on their feet and always maintaining the 6-foot social distancing guidelines per the CDC. We will continue to implement necessary changes as they are instructed to us.

Q. WHAT DOES HVAC STAND FOR?

  • Read more

    Heating, Ventilation and Air Conditioning.

Q. WHAT REGULAR MAINTENANCE DO HEATING AND AIR CONDITIONING SYSTEMS NEED?

  • Read more

    The most important part of the HVAC maintenance aspect is maintaining unrestricted air flows. Dust, dirt, and debris are an HVAC system’s worst enemies. Whether it’s an indoor or outdoor unit, you must keep all filters clean and heat exchangers and coils free of restrictions.


    We recommend that your heating and cooling system be checked and serviced twice a year; ideally a spring and autumn tune-up. Also, we recommend that you change your filter regularly, depending on the type of filter you have. This alone can eliminate many of the most common problems that need fixing and can significantly reduce the likelihood of a serious breakdown. A Suburban Heating and Air Conditioning Partner Plan is your assurance that these maintenance needs are met regularly and that any potential problems are promptly identified.

Q. WHY DO I NEED TO CHANGE MY FILTER REGULARLY?

  • Read more

    Regular filter replacement helps your heating and cooling system operate at peak levels and improves indoor air quality. It is important to change filters regularly to ensure proper airflow and to keep your home free from dust, allergens, and germs. Depending on the type of filter you have, you may require weekly or monthly filter replacements. Your Suburban Heating and Air Conditioning service or installation technician will recommend the ideal filters and replacement schedules for your unit(s).

Q. HOW OFTEN SHOULD I REPLACE MY FILTERS?

  • Read more

    In general, Suburban Heating and Air Conditioning recommends that you replace your disposable filters at least once a month. If you have washable filters, they should be cleaned once a month. Your Suburban Heating and Air Conditioning technician will recommend a replacement schedule that delivers the optimum efficiency and filtration for your specific system. With a Suburban HVAC Priority Care Maintenance Program, we clean and inspect your HVAC system twice each year. Part of the service includes changing the filters or servicing your filtering system. Unless you have special circumstances, our service should be adequate. We recommend that you visually check filters and filtering equipment monthly. If filters look dirty, they need to be cleaned or replaced.

Q. IN ADDITION TO CHANGING MY FILTERS, WHAT MAINTENANCE SHOULD I DO ON MY HEATER AND/OR AIR CONDITIONER?

  • Read more

    Most maintenance should be performed only by a qualified service technician. But here are some things that you can do to assure optimal performance:


    Keep ground mounted outdoor units clear of debris, clutter, and weeds; they can reduce the airflow to the unit.


    Use caution with weed trimmers around the unit to prevent damaging control wiring.


    Keep pets away from the unit; pet urine can cause expensive damage.

Q. HOW OFTEN SHOULD I HAVE MAINTENANCE DONE ON MY AIR CONDITIONER?

  • Read more

    You should have maintenance done on your air conditioning system at least once a year – spring to early summer being the best times. This not only ensures maximum efficiency, it enables us to foresee any possible problems that may occur in the near future.

Q. IS THERE ANYTHING I SHOULD CHECK PRIOR TO CALLING FOR SERVICE?

  • Read more

    Check to be sure that the air conditioner or furnace is turned on. Check that the breakers and the disconnects are turned on and be sure the thermostat is set correctly. Also make a note of any strange noises or smells.

Q. HOW DO I KNOW IF MY SYSTEM IS WORKING PROPERLY?

  • Read more

    Is it making strange noises? Is it cooling or heating all areas of your home sufficiently? Has it been taking longer to cool down or heat up? Have your utility bills been rising for no apparent reason? Any of these are signs that you may have a problem that needs service. In most cases, the longer you delay, the worse any underlying problems will get. So be sure to contact Suburban Heating and Air Conditioning to check out your system whenever you notice anything out of the ordinary.


    How are the sizing capacities of heating and cooling systems measured?


    Heating and cooling systems sizing is based on B.T.U.H. (British Thermal Units Per Hour). Air Conditioning and Heat Pumps are also rated in tonnage. 12,000 BTUH equals one (1) ton. Residential systems can range from 1 to 5 tons.

Q. HOW IMPORTANT IS IT TO GET THE RIGHT SIZE OF HEATING AND COOLING EQUIPMENT?

  • Read more

    Sizing HVAC equipment is very important from the standpoints of both comfort and energy use. Heating and cooling equipment that are over-capacity will not run as frequently or as long when it does run. In both cases, this may mean poor humidity control. It could also result in temperature variations or noticeable cycling. Over-capacity equipment will not be as energy efficient as properly matched capacity either. On the other hand, equipment that is under-sized, will obviously result in loss of comfort during temperature extremes.

Q. WHAT SIZE HVAC SYSTEM SHOULD I HAVE?

  • Read more

    Unfortunately, there’s no simple rule of thumb for determining the ideal size of system for each home. For example, depending upon the construction of your home, one (1) ton of air conditioning can cool anywhere from 300 to 800 square feet of home. The only way to insure the size of the system you purchase will be large enough to heat or cool your home, but not any larger than you need, is to have your home’s individual heating and cooling needs evaluated by a licensed professional. A Suburban Heating and Air Conditioning Comfort Estimator will perform a FREE detailed In-Home Energy Analysis to determine a selection of systems that will work best for your home’s needs and your budget.

Q. IS A SYSTEM WITH MORE CAPACITY BETTER?

  • Read more

    No. A larger heating system with more capacity delivers less comfort and costs more to operate. An air conditioner is at its least efficient when it is first turned on. A system with too much capacity will run in numerous short cycles, turning on and off repeatedly, therefore causing it to be less efficient. Also keep in mind that an air conditioner only removes humidity when it’s running, so a system with shorter run cycles doesn’t remove humidity from the air very well.

Q. HOW DO I KNOW IF MY A/C UNIT IS BIG ENOUGH?

  • Read more

    Bigger isn’t always better; its performance and efficiency that count. Before purchasing a replacement system you should always make sure your system is sized properly to match your needs and budget. Your Suburban Heating and Air Conditioning Comfort Specialist will thoroughly assess your home and comfort requirements to determine the proper size and make the appropriate recommendation

Q. HOW IS THE EFFICIENCY OF HEATING AND COOLING EQUIPMENT MEASURED?

  • Read more

    When purchasing a furnace, heat pump or air conditioner, ALWAYS ask about its Efficiency Ratings. They will tell you will tell you how efficiently the unit uses fuel (gas, oil or electricity). The most-frequently used efficiency ratings are:

    • SEER (Seasonal Energy Efficiency Ratio): This ratio tells you the amount of cooling your system will deliver per dollar spent on electricity The SEER rating of any unit can range anywhere from 13 to 17. The higher the SEER the more efficient the system will be and the less it will cost in the long run to own and operate.
    • HSPF (Heating Seasonal Performance Factor): Similar to SEER, it is a measurement of efficiency of the heating portion of a heat pump. HSPF ratings range from 6.8 to 10; high-efficiency units have efficiencies of 7.5 HSPF or above.
    • AFUE (Annual Fuel Utilization Efficiency ratio): A measurement of the percent of heat produced by a furnace for every dollar of fuel consumed. The higher the AFUE rating, the lower the fuel costs. All furnaces manufactured today must meet at least 78%. Older furnaces (10 – 15 years or older) may fall below this minimum. Furnaces with AFUE ratings from 78% to 80% are considered mid-efficiency; ones with AFUE ratings above 90% are considered high-efficiency.
    • MERV (Minimum Efficiency Reporting Value): A filter rating system relating to the size of the holes in the filter that allow air to pass through. The higher the MERV rating, the smaller the holes and the higher the efficiency in capturing contaminants. MERV rating range from a low of 1 to a high of 16.
    • ENERGY STAR: An Environmental Protection Agency designation attached to HVAC products that meet or exceed guidelines for high-efficiency performance above the standard government minimums.
Share by: